Monolithic two-terminal tandem solar cells using Sb2S3 and solution-processed PbS quantum dots achieving an open-circuit potential beyond 1.1 V

12 May 2023, Version 1
This content is a preprint and has not undergone peer review at the time of posting.


Multijunction solar cells show the prospect to raise the theoretical efficiency limit of single junction solar cells by minimizing transmissive losses of large bandgap and emissive losses of lower bandgap absorber solar cells. In solar cell applications, Sb2S3 is considered an attractive absorber due to its elemental abundance, stability, and high absorption coefficient in the visible range of the solar spectrum, yet with a band gap of 1.7 eV it is transmissive for near-IR and IR photons. Using it as the top cell inside a tandem solar architecture in combination with a bottom cell employing e.g., PbS quantum dots, which have an adjustable band gap suitable for absorbing longer wavelengths, is hence a promising approach to harvest the solar spectrum more effectively. In this work, these two subcells are monolithically grown and connected in series by a poly(3,4-ethylene-dioxythiophene) polystyrene sulfonate (PEDOT:PSS)−ZnO tunnel junction as the recombination layer. We explore the surface morphology of ZnO QDs resulting from different spin coating conditions, which serve as the bottom cell’s electron transport material. Furthermore, we examine the differences in photogenerated current upon varying the PbS QDs absorber layer thickness and the electrical and optical characteristics of the tandem with respect to the standalone reference cells. This tandem architecture demonstrates an extended spectral absorption into the IR with an open-circuit potential exceeding 1.1 V and a power conversion efficiency of 5.6%, projecting above the PCE of each single-junction cell.


chalcogenide solar cells
antimony sulfide
lead sulfide
atomic layer deposition
recombination layer
mapping ellipsometry

Supplementary materials

SUPPORTING INFORMATION Monolithic two-terminal tandem solar cells using Sb2S3 and solution-processed PbS quantum dots achieving an open-circuit potential beyond 1.1 V
A PDF file of the optical absorbance spectra, X-ray diffraction patterns of the materials, current-voltage plots of the tunnel junction and the tandem before and after EIS, Nyquist and Bode plots, Mott-Schottky analysis, and tabulated performance parameters for current-voltage plots is available.


Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.