Poly(trihydrazino-diphosphine diazide)s (PHPDs): Hybrid Organic-Inorganic Polymers via Staudinger Polycondensation between PN Cages and Organic Diazides

17 October 2024, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

Organic polymers generally feature 1-dimensional chains or 2-dimensional rings in their backbones since the strain in small hydrocarbon cages (e.g. cubane) and synthetic challenges limit the availability of 3-dimensional units available as monomers. Inorganic cages are less strained owing to their longer and more ionic bonds, and many can be very accessible, offering an inroad into the minimally explored third dimension that is difficult to study with organic systems. However, only two families of inorganic cages – carboranes and polyhedral oligomeric silsesquioxanes (POSS) – have so far been studied and commercialized to capitalize upon the enhanced mechanical and thermal properties resulting from the use of higher dimensionality backbone components. Further exploration of this fundamentally interesting and potentially valuable parameter space requires development of new inorganic cages that are accessible on large scales, stable under ambient conditions, and polymerizable to give air- and moisture-stable materials. Here we report that a readily-assembled and bench-stable PN cage, P(NMeNMe)3P (1), undergoes clean Staudinger polycondensations with organic diazides (7R) to yield air/water-stable, solution-processable, and film-forming linear poly(trihydrazino-diphosphine diazide)s, PHPDs (8R), as a new family of hybrid organic-inorganic polymers. The solubility of PHPDs in organic or aqueous media can be controlled by choice of diazide and backbone architecture, which we rationally modify to access alternating co-polymers (12R-alt-R’) or multi-block copolymers (12R-block-R’). We also show how a tetraphosphorus cage P4(NMe)6 (2), can be used to crosslinking PHPDs to make more robust materials. Thermal analyses show Tg values for PHPDs that are comparable with rigid π-conjugated polymers (up to 152 °C) and, despite a high nitrogen content (up to 32%) and 3 N-N σ-bonds per repeat unit, decomposition temperatures exceeding 200 °C with char yields up to 60%. These data bear out theoretical predictions of high stability arising from the presence of 3-dimensional units in the backbone. As one potential application area, we show that the high char yields and PN content of a polyether based PHPD (8e) can be leveraged for halogen-free flame-retardancy. These results debut new low-carbon hybrid organic-inorganic polymers with an unusual backbone topology, reveal the design rules for controlling their microstructures and mechanical properties, and lay the foundation for future applied studies with PN cages.

Keywords

main group chemistry
inorganic polymers
phosphorus
phosphazenes
Staudinger
hybrid polymers

Supplementary materials

Title
Description
Actions
Title
Supporting information
Description
Synthesis and characterization
Actions
Title
Video S1
Description
Treated with polymer 8e
Actions
Title
Video S2
Description
Control - untreaded with polymer 8e
Actions
Title
Video S3
Description
Manipulation of char left behind after combustion.
Actions

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.