Mesoporous TiO2 materials have been prepared by an aerosol process, which leverages on the acetic acid-mediated sol-gel chemistry and on the evaporation-induced self-assembly phenomenon to obtain materials with high specific surface area and large mesoporous volume. The obtained spherical particles are calcined to release the porosity. It is shown that the mesoscopic order can be preserved when the calcination is carried out at relatively low temperature (375 °C and below). Harsher calcination conditions lead to the progressive destruction of the mesostructured, concomitant with a progressive drop of textural properties and with the crystallization of larger anatase domains. The mesoporous TiO2 material calcined at 350°C (specific surface area = 260 m².g-1; pore volume = 0.36 cm³.-1; mean pore diameter = 5.4 nm) was selected as a promising support for preformed RuO2 nanoparticles, and subsequently annealed in air. It is shown that the presence of RuO2 nanoparticles and subsequent annealing provoke further intense modification of the texture and crystallinity of the TiO2 materials. In addition to a drop in the textural parameters, a RuO2-mediated crystallization of rutile TiO2 is highlighted at temperature as low as 250°C. After an in situ reduction in H2, the catalysts containing TiO2 rutile and relatively small RuO2 crystals showed the highest activity in the methanation of CO2.
Kim Debecker mesoporous Ru-TiO2 aerosol - preprint - ESI