Understanding the Capacity Loss in LNMO-LTO Lithium-Ion Cells at Ambient and Elevated Temperatures

05 March 2018, Version 1
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

The high voltage spinel LiNi0.5Mn1.5O4 (LNMO) is an attractive positive electrode due to its operating voltage around 4.7 V (vs Li/Li+) and high power capability. However, problems including electrolyte decomposition at high voltage and transition metal dissolution, especially at elevated temperatures, have limited its potential use in practical full cells. In this paper, a fundamental study for LiNi0.5Mn1.5O4 || Li4Ti5O12 (LTO) full cells has been performed to understand the effect of different capacity fading mechanisms contributing to overall cell failure. Electrochemical characterization of cells in different configurations (regular full cells, back-to-back pseudo-full cells and 3-electrode full cells) combined with an intermittent current interruption technique have been performed. Capacity fade in the full cell configuration was mainly due to progressively limited lithiation of electrodes caused by a more severe degree of parasitic reactions at the LTO electrode, while the contributions from active mass loss from LNMO or increases in internal cell resistance were minor. Comparison of cell formats constructed with and without the possibility of cross-talk indicate that the parasitic reactions on LTO occur because of the transfer of reaction products from the LNMO side. The efficiency of LTO is more sensitive to temperature causing a dramatic increase in the fading rate at 55 °C. These observations show how important the electrode interactions (cross-talk) can be for the overall cell behaviour. Additionally, internal resistance measurements showed that the positive electrode was mainly responsible for the increase of resistance over cycling, especially at 55 °C. Surface characterization showed that LNMO surface layers were relatively thin when compared to the SEI on LTO. The SEI on LTO does not contribute significantly to overall cell resistance even though these films are relatively thick. XANES measurements showed that the Mn and Ni observed on the anode were not in metallic state; the presence of elemental metals in the SEI is therefore not implicated in the observed fading mechanism through a simple reduction process of migrated metal cations.

Keywords

High Voltage Spinel
Cross-talk
Electrode interactions
LNMO-LTO
Mn dissolution

Supplementary materials

Title
Description
Actions
Title
Supporting Information
Description
Actions

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.