These are preliminary reports that have not been peer-reviewed. They should not be regarded as conclusive, guide clinical practice/health-related behavior, or be reported in news media as established information. For more information, please see our FAQs.
Effects of ABS-g-MAH on Morphologies, Compatibilities and Properties of Polycarbonate Ternary Blends.pdf (2.18 MB)
Effects of ABS-g-MAH on morphologies, compatibilities and properties of polycarbonate ternary blends
Preprints are manuscripts made publicly available before they have been submitted for formal peer review and publication. They might contain new research findings or data. Preprints can be a draft or final version of an author's research but must not have been accepted for publication at the time of submission.
revised on 02.10.2020 and posted on 05.10.2020by Ruogu Tang, Wenfa Dong, Dingfang Chen
In this work, ABS-g-MAH was used as the compatibilizer in poly carbonate/acrylonitrile styrene acrylate/poly(methyl methacrylate) blends. The polymer blends were prepared via a two-step method: first, raw PC, ASA, PMMA resins and ABS-g-MAH additives were completely mixed and granulated by extrusion molding, and then the standard PC/ASA/PMMA blends samples were obtained by injection molding. A comprehensive characterizations were performed on the PC/ASA/PMMA blends of their morphologies, mechanical properties and thermal properties. The results showed that the addition of ABS-g-MAH could promote the compatibilities among PC, ASA and PMMA, and ABS-g-MAH would significantly alter the mechanical and thermal properties of blends. In addition, the modified PC/ASA/PMMA was well compatible with natural rubber and cause less cytotoxicity when interacting with cells.