Effects of ABS-g-MAH on Morphologies and Properties of PC/ASA/PMMA Blends

20 March 2020, Version 4
This content is a preprint and has not undergone peer review at the time of posting.

Abstract

In this work, ABS-g-MAH was used as the compatibilizer in poly carbonate/acrylonitrile styrene acrylate/poly(methyl methacrylate) blends. The polymer blends were prepared via a two-step method: first, raw PC, ASA, PMMA resins and ABS-g-MAH additives were completely mixed and granulated by extrusion molding, and then the standard PC/ASA/PMMA blends samples were obtained by injection molding. A comprehensive characterizations were performed on the PC/ASA/PMMA blends of their morphologies, mechanical properties and thermal properties. The results showed that the addition of ABS-g-MAH could promote the compatibilities among PC, ASA and PMMA, and ABS-g-MAH would significantly alter the mechanical and thermal properties of blends.

Keywords

polymer blends
ABS-g-MAH
mechanical strength
stress
segment relaxation

Comments

Comments are not moderated before they are posted, but they can be removed by the site moderators if they are found to be in contravention of our Commenting Policy [opens in a new tab] - please read this policy before you post. Comments should be used for scholarly discussion of the content in question. You can find more information about how to use the commenting feature here [opens in a new tab] .
This site is protected by reCAPTCHA and the Google Privacy Policy [opens in a new tab] and Terms of Service [opens in a new tab] apply.